High-detail photopolymer printing for visual prototypes, jewellery masters, dental models and miniatures. Smooth surfaces and sharp edges at 25-micron layers — where filament can’t hold the detail.
Service 02
Layer lines you have to look for — ideal for visible-surface parts.
Crisp text, thin walls to 0.5 mm and fine lattice geometry.
Castable resin that burns out clean for jewellery and metal casting.
Biocompatible dental resins for guides and models.
Glassy surfaces straight off the plate, minimal post-sanding.
Calibrated wash-and-cure for dimensional stability and safe handling.
| Layer height | 0.025 – 0.1 mm | 25 µm for finest detail |
| Build volume | 218×123×260 mm | Larger parts via tiling |
| Tolerance | ±0.05 / ±0.03 mm | Typical / achievable |
| Min wall | 0.5 mm | Finer than filament |
| Min feature | 0.3 mm | Crisp text and edges |
| Resins stocked | 9 | Standard → dental |
| Finish | Post-cured | Washed, cured, supports removed |
| Lead time | 24 – 48 h | Same-day for small parts |
Presentation-grade models with smooth, paintable surfaces.
High-detail figures, busts and scale models.
Castable patterns that burn out without ash.
Surgical guides and study models in biocompatible resin.
Hero props and intricate set pieces for screen.
Smooth originals for silicone moulds and short-run casting.
Send your model — fixed, itemised price back within 4 working hours.
Hollowing, support generation and nesting on the plate.
Photopolymer cure, layer by layer, on calibrated SLA machines.
Washed, UV-cured, supports removed, measured and dispatched.
Quote in 4 working hours · NDA on request · Ships from Kyiv